Melitta Cafina XT6 სახელმძღვანელო

Melitta Cafina XT6
9.1 · 4
PDF სახელმძღვანელო
 · 1 გვერდი
Ინგლისური
სახელმძღვანელოMelitta Cafina XT6

Melitta

®

660 DE-2

Dimension and data sheet

Attention: All dimensions are approximate!
All Melitta® machines are delivered ready for connection. However, before setting up the necessary connections must be
installed on site easily accessible within a radius of 1 m.
This preliminary work must be performed by licensed professionals in strict compliance with valid regulations. The Melit-
ta® customer service is not authorised for this work and therefore does not take any responsibility for the installation.
The sanitary and electrical connections are located on the back of the machine. The machine must be placed on a solid
tabletop.
If the supply lines are routed up from below the table, an * approx. Ø 100 mm must be drilled behind/under the machine.
a + a1) Electrical connection
400 V 3 N ~ , Power consuption see table.
The supply line must be separately fused by the customer. The connection must be made via an easily accessible
earthing contact socket outlet or CEE socket. The socket must be protected by a ground fault circuit breaker (max. 30
mA). If permanent connection cannot be avoided, a switch with min. 3 mm contact separation must be installed in the
immediate vicinity of the machine for the purpose of all-pole isolation.
b + b1) Water supply
DN 15 - G 3/4“ male thread
According to the regulations of the German Association for Gas and Water (DVGW) a water tap with check valve must
be installed in an easily accessible place by the customer. A special connection hose is supplied. For safety reasons, this
hose should not be shorted. The static water line pressure must be at least 0.2 MPa (2 bar). If the pressure is higher than
0.6 MPa a pressure reducer must be installed by the customer upstream of the stop cock (6 bar).
c) Waste water connection
NW 25 - 1“
The above machine is tted with a water drainage socket and is to be connected to an on-site drain using the supplied
hose. An odour trap should be installed.
Dimensions A B C D Power
consuption
(kw) / Fuse
(A)
Total
weight,
lled (kg)
Type
6610 DE-2 787 702 847 597 (2x) 6,43/16 81,0
6610 W DE-2 787 702 847 597 (2x) 8,50/20 97,0
6620 DE-2 890 805 950 700 (2x) 9,38/16 119,0
6620 W DE-2 890 805 950 700 (2x) 11,45/25 135,0
Date:
Page:
Subject to alterations.
Ownership of Melitta.
Duplication not allowed.
10/2014
1/1
6610 DE-2 is shown
392
531
30
190
D
C
a.
min. 650
min. 600
c.
a1.
b.b1.
1. 3.
2.
392
292
50
350
c.
b. a
.
b1.a1.
50
200 292 200
c.
684
1368
70
* Opening 100 mm
a./b.
a1./b1.
1368
4
1. Flow heater DE
2. Pyramid lter SF
3. Warming unit WA
4. Drip bar

იხილეთ Melitta Cafina XT6 სახელმძღვანელო უფასოდ აქ. ეს სახელმძღვანელო მიეკუთვნება ყავის მადუღარები კატეგორიას და მომხმარებელთა მიერ 4 საშუალოდ 9.1 -დან. ეს სახელმძღვანელო ხელმისაწვდომია შემდეგ ენებზე: Ინგლისური. გაქვთ შეკითხვა Melitta Cafina XT6-თან დაკავშირებით ან გჭირდებათ დახმარება? დასვით თქვენი შეკითხვა აქ

დახმარება გჭირდებათ?

გაქვთ შეკითხვა Melitta შესახებ და პასუხი სახელმძღვანელოში არ არის?

  • მიიღეთ განახლებები გადაწყვეტილებების შესახებ
  • მიიღეთ პასუხები თქვენს კითხვაზე

Კითხვა და პასუხი

შეკითხვების რაოდენობა: 0

ზოგადი
ბრენდიMelitta
მოდელიCafina XT6
პროდუქტიყავის მადუღარა
ენაᲘნგლისური
ფაილის ტიპიᲘნსტრუქცია (PDF), Მონაცემთა ფურცელი (PDF)

ვერ პოულობთ თქვენს შეკითხვაზე პასუხს სახელმძღვანელოში? თქვენ შეგიძლიათ იპოვოთ პასუხი თქვენს შეკითხვაზე FAQ-ში Melitta Cafina XT6 ქვევით.

რამდენად ხშირად ჭირდება ჩემს ყავის აპარატს ნადებისგან წმენდა?

ყავის აპარატის ნადების მოშორების საჭიროება დამოკიდებულია მისი გამოყენების სიხშირესა და წყლის სიხისტეზე. წყლის მაღალი სიხისტის შემთხვევაში, რეკომენდირებულია ნადების წმენდა თვეში ერთხელ, ხოლო რბილი წყლის შემთხვევაში საკმარისია კვარტალურად.

რა არის ჩემი ყავის აპარატის ნადებისგან გაწმენდის საუკეთესო გზა?

ყავის აპარატის ნადებისგან გასაწმენდად, რეკომენდირებულია ნადების მოსაშორებელი თხევადი საშუალება, რომლის ეტიკეტიც მიუთითებს მის შესაბამისობას ყავის აპარატზე გამოყენებისათვის.

რა არის ესპრესო?

ესპრესო არის მცირე რაოდენობით კონცენტრირებული ყავა.

რამდენ ხანს შემიძლია ყავის მარცვლების შენახვა?

ვარგისიანობის ვადა შეგიძლიათ იხილოთ ყავის მარცვლების შეფუთვაზე. ვარგისიანობის ეს ვადა მოქმედებს შფუთვის გაუხსნელ მდგომარეობაში შენახვისას.

რა არის ყავის შესანახად საუკეთესო საშუალება?

რეკომენდირებულია ყავის შენახვა ჰერმეტულ და სუფთა კონტეინერში.

როგორ მოქმედებს საფქვავი ყავის გემოზე?

ყავის მარცვლების დაფქვა ძლიერ გავლენას ახდენს ყავის გემოზე. თუ ყავის მარცვლები ძალიან წვრილად არის დაფქული, თქვენ გექნებათ უფრო ძლიერი გემო, ხოლო თუ დაფქული უფრო უხეშია, თქვენ გექნებათ უფრო რბილი გემო.

Melitta Cafina XT6-ის სახელმძღვანელო ხელმისაწვდომია Ქართული ენაზე?

სამწუხაროდ, ჩვენ არ გვაქვს Melitta Cafina XT6-ის სახელმძღვანელო Ქართულიენაზე ხელმისაწვდომი. ეს სახელმძღვანელო ხელმისაწვდომია Ინგლისური ენაზე.

თქვენი შეკითხვა არ არის ჩამოთვლილი? დასვით თქვენი შეკითხვა აქ

შედეგი არ არის