Honeywell RTH230B სახელმძღვანელო

Honeywell RTH230B
9.2 · 2
PDF სახელმძღვანელო
 · 4 გვერდი
Ინგლისური
სახელმძღვანელოHoneywell RTH230B
RTH230B 69-1800 2/6/05 1/4
The RTH230B programmable thermostat can be used to control:
a gas, fuel oil or electric furnace - 2 or 3 wires
a central air conditioner - 2 or 3 wires
a hot water system with or without pump - 2 wires
a millivolt system - 2 wires
a central heating and cooling system - 4 or 5 wires
Note: These thermostats are not compatible with heat pumps or
multi-stage systems.
Features
System operating mode selection: heat, cool or off
Fan operating mode selection: automatic or on (continuous)
Programmable heating and cooling cycle lengths: 10, 12, 15, 20
or 30 minutes
Temperature display in °F or °C
Battery replacement indicator
5-2 programming including:
- Preprogrammed energy-saving schedule
- Early Start
- Temporary bypass
- Time display (12 h or 24 h)
Filter replacement indicator

2.1 Removing the Old Thermostat

IN ORDER TO AVOID ANY RISK OF ELECTRIC SHOCK, CUT
POWER TO THE HEATING SYSTEM.

n Remove the old thermostat to access the wires.

Warning: If the old thermostat was mounted onto an electrical box,
it was probably powered by 120/240 volts. In this case, this thermo-
stat cannot be used.
o Identify and label each wire (with the corresponding letter on
the wire terminal) and remove them from the terminals.

p If necessary, strip the end of each wire (maximum of 1/4 inch).

q Wrap the wires around a pencil to prevent

them from falling into the wall.

r If the hole in the wall is too big, insulate it

using a non-flammable material in order to
avoid air draughts behind the thermostat.

2.2 Installing the New Baseplate

For a new installation, choose a location approximately 5 feet
(1.5 m) above the floor and on an inside wall. Avoid draughty
areas (top of staircase, air outlet, etc.), dead air spots (behind
doors), direct sunlight or areas near concealed pipes or chim-
neys.

n Remove the thermostat faceplate.

o Loosen the locking screw to separate the thermostat from its

baseplate (the screw cannot be completely removed).

p Tilt the thermostat upwards.

q Mark and bore the appropriate mounting holes (or use the

existing holes). Insert the plastic anchors.

r Pass the wires through the opening of the baseplate and fix the

baseplate to the wall using the screws provided.

2.3 Connecting the Thermostat

The connection of the new thermostat should be similar to that of
the old thermostat; however, it can vary depending on the installa-
tion.
Note: The red jumper wire between the Rc and Rh terminals must
be removed in 2- or 5-wire installations. The jumper must be used in
3- or 4-wire installations if you wish to use the mode selector switch
for the fan.

1. Introduction

2. Installation

RTH230B

Programmable Electronic Thermostat

Installation and User Guide

Display
Adjustment
buttons
System operating
mode selector
Fan operating
mode selector
Programming
buttons
Rh Heating power supply
Rc Cooling power supply
W Heating signal
Y Cooling signal
GFan

იხილეთ Honeywell RTH230B სახელმძღვანელო უფასოდ აქ. ეს სახელმძღვანელო მიეკუთვნება თერმოსტატი კატეგორიას და მომხმარებელთა მიერ 2 საშუალოდ 9.2 -დან. ეს სახელმძღვანელო ხელმისაწვდომია შემდეგ ენებზე: Ინგლისური. გაქვთ შეკითხვა Honeywell RTH230B-თან დაკავშირებით ან გჭირდებათ დახმარება? დასვით თქვენი შეკითხვა აქ

დახმარება გჭირდებათ?

გაქვთ შეკითხვა Honeywell შესახებ და პასუხი სახელმძღვანელოში არ არის?

  • მიიღეთ განახლებები გადაწყვეტილებების შესახებ
  • მიიღეთ პასუხები თქვენს კითხვაზე

Კითხვა და პასუხი

შეკითხვების რაოდენობა: 0

The Honeywell RTH230B is a thermostat that can be used to regulate the temperature of a room or a building. It is designed with simple controls that allow users to set their preferred temperature easily. The thermostat has a large display screen that shows the current temperature, as well as the set temperature. It also includes features that allow users to set different temperature levels for different times of the day or week, ensuring that the temperature is always at a comfortable level. The Honeywell RTH230B can be installed easily, with clear instructions provided. It is compatible with a range of heating and cooling systems, including gas, oil and electric heating systems, and central air conditioning systems. The thermostat can be powered by either battery or wired connection, depending on the user's preference. In terms of energy efficiency, the Honeywell RTH230B is designed to help users save money on their energy bills. It includes a programmable schedule that allows users to set the temperature lower when they are not at home, reducing unnecessary energy use. It also includes a filter indicator that reminds users when it is time to replace the air filter, which can also help to improve energy efficiency. Overall, the Honeywell RTH230B is a reliable and easy-to-use thermostat that can provide users with precise temperature control and energy savings.

ზოგადი
ბრენდიHoneywell
მოდელიRTH230B
პროდუქტითერმოსტატები
ენაᲘნგლისური
ფაილის ტიპიᲘნსტრუქცია (PDF)

ვერ პოულობთ თქვენს შეკითხვაზე პასუხს სახელმძღვანელოში? თქვენ შეგიძლიათ იპოვოთ პასუხი თქვენს შეკითხვაზე FAQ-ში Honeywell RTH230B ქვევით.

სად არის საუკეთესო ადგილი თერმოსტატის დასაყენებლად?

თერმოსტატისთვის საუკეთესო ადგილია ოთახი, სადაც ყველაზე მეტ დროს ატარებთ, ხშირ შემთხვევაში მისაღები ან სამზარეულო. მოათავსეთ თერმოსტატი იატაკიდან დაახლოებით ერთნახევარ მეტრზე, არა მზეზე და არც გარე კედელზე.

რა არის თერმოსტატის მკვდარი ზოლი?

თუ თქვენს თერმოსტატს აქვს მკვდარი ზოლი, თქვენი ინსტალაცია "დასვენების მდგომარეობაშია". თერმოსტატი ჩართულია მხოლოდ მაშინ, როდესაც, მაგალითად, სხვაობა გადააცილებს 2˚C- ზე მეტს ოთახში დაყენებული ტემპერატურიდან.

რა არის ოთახის იდეალური ტემპერატურა?

უმეტესობა თვლის, რომ ოთახის იდეალური ტემპერატურა 19-დან 22 გრადუსამდეა.

Honeywell RTH230B-ის სახელმძღვანელო ხელმისაწვდომია Ქართული ენაზე?

სამწუხაროდ, ჩვენ არ გვაქვს Honeywell RTH230B-ის სახელმძღვანელო Ქართულიენაზე ხელმისაწვდომი. ეს სახელმძღვანელო ხელმისაწვდომია Ინგლისური ენაზე.

თქვენი შეკითხვა არ არის ჩამოთვლილი? დასვით თქვენი შეკითხვა აქ

შედეგი არ არის